DESCRIPTION

Accotreat C 602 is a liquid corrosion and scale inhibitor based on sodium nitrite and sodium borate for closed cooling systems and chilled water circuits. It does not contain chromates.

Accotreat C 602 is effective even where oxygen or air may be entrained in the circulating water. It will protect most metals including copper but excluding aluminium.

GENERAL SPECIFICATION

Appearance………………………………… Pale yellow liquid
Specific gravity………………………….….. 1.04
pH…………………………………...…….. 11 - 12
Non-flammable.
 

TREATMENT AND DOSAGE REQUIREMENTS

Accotreat C 602 is normally dosed by means of a feeder installed on a by-pass to the circulating system or it can be introduced to the header tank directly.

Initial dose is normally 3 liters per 100 liters of cooling water. Subsequently, Accotreat C 602 is dosed to maintain 1000 - 1500 ppm of sodium nitrite in the system.

Overdosing with Accotreat C 602 is not harmful to the system.

HANDLING

Avoid contact with liquid and inhalation of vapour. Wash with plenty of water in case of eyes or skin contact.
 
SAFETY

Accotreat C 602 is alkaline. Wash splashes on skin or eyes with copious amount of clean water. If ingested, give plenty of water and seek medical attention.

PACKING Accotreat C 602 is available in 25-liter container.

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, expressed warranty or implied warranty of merchantability of fitness for a particular purpose or representation, expressed or implied, for which seller assumes legal responsibility and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Date 06/01/97